Ideal for both new and retrofit applications, Perm-A-Barrier Wall
Flashing is a 40-mil through wall membrane designed to collect water
that may enter wall cavities and direct it to the exterior through
the wall's weep system. Its unique green color and repeated imprinted
logo quickly differentiate it on the jobsite from other flashing types.
Easy to install, Perm-A-Barrier can be applied to concrete, masonry,
block, steel, gypsum and wood and is highly effective even on vertical
surfaces and around details. Available in 83.3' rolls in widths of
12", 18", 24" and 36".
Perm-A-Barrier® Wall Membrane
A tough, self-adhering, self-healing composite membrane. It consists
of 0.9 mm (.036 in) of rubberized asphalt and an integrally bonded
0.1mm (.004 in), high density cross laminated polyethylene film.
When combined with a structural substrate, Perm-A-Barrier wall membrane
produces a virtually impermeable air and water barrier on concrete,
masonry, gypsum board and wood walls. It is designed to be a cost-effective
system which acts as both an air and vapor barrier. Perm-A-Barrier
Wall Membrane retards the diffusion of moisture through the building
enclosure. It provides a continuous seal against air and vapor leakage
around the entire building.
Vycor® Plus Self-Adhered Flashing
Provides superior protection against water, air and moisture infiltration
in window and door openings, corner boards, under stucco finishes,
masonry walls and other flashing areas. It is designed to work in
severe winter climates, milder climates, and in coastal areas where
wind-driven rain is common. It should not be used on roofs. Vycor
Plus is ideal for sealing joints, seams, holes, and other unwanted
openings in wall sheathing systems. It is 25 mil thick and compatible
with wood, plywood, oriented strand board, concrete and masonry
and fully adheres to the substrate to prevent water from passing
through and into the substrate. Available in 75' shrink-wrapped
rolls in widths of 4", 6", 9" and 12".