Grace Construction Products

Grace Logo
Product Selection

Drainage/Protection

Hydroduct® 200 Drainage Composite
Replaces Hydroduct® Classic Drainage Composite

Hydroduct 200 Drainage Composite (formerly known as Hydroduct Classic Drainage Composite) consists of a nominal 10 mm (0.375 in.) thick drainage core and a high performance geotextile. The geotextile serves to retain soil while allowing water to pass from the soil to the core and is securely bonded to the core to prevent intrusion of the fabric into the core during service. It is designed to collect and transport water and recommended for use on foundation walls, retaining walls, bridge abutments, tunnels, earth sheltered structures, plaza decks, soil retention systems and planters. Not recommended for use over Bituthene® Waterproofing membranes.
Data Sheet Specifications

Hydroduct® 220 Drainage Composite
Replaces Hydroduct® 2 Drainage Composite

Hydroduct 220 Drainage Composite (formerly known as Hydroduct 2 Drainage Composite) consists of a 10 mm (0.375 in.) thick drainage core, a high performance geotextile and a high strength backing film. Designed to collect and transport water, it is recommended for use on foundation walls, retaining walls, bridge abutments, tunnels, earth-sheltered structures and planters. It serves as a drainage composite and protection course for all Bituthene® waterproofing membranes used on all vertical applications.
Data Sheet Specifications

Hydroduct® 225 Drainage Composite
Replaces Hydroduct® HR Drainage Composite

Hydroduct 225 Drainage Composite (formerly known as Hydroduct HR Drainage Composite) is uniquely designed for resistance to heat and hydrocarbon contaminated environments. It consists of a nominal 10.9 mm (0.43 in.) drainage core, a high performance geotextile and a high strength backing film. It is designed to maintain compressive strength and flow rate upon exposure to hydrocarbon contamination in the soil or in the presence of elevated temperatures. The product serves as a combination drainage and protection course for all Bituthene waterproofing membranes.
Data Sheet Specifications

Hydroduct® 660 Drainage Composite
Replaces Hydroduct® HZ Drainage Composite

Hydroduct 660 Drainage Composite (formerly known as Hydroduct HZ Drainage Composite) consists of a nominal 10 mm (0.375 in.) thick drainage core and high performance geotextile. The high strength, non woven geotextile is designed to maintain permittivity while protecting the drainage composite from jobsite damage prior to, and during, the installation of the overburden. Hydroduct 660 is designed to collect and transport water. It can be used on all horizontal applications up to a static load of 2440 kg/m2 (500 lbs/ft2) or approximately 1.2 m (4 ft) of soil. It serves as a combination drainage and protection course for all Bituthene® waterproofing membranes.
Data Sheet Specifications

Hydroduct® Coil 600 Perimeter Drain
Hydroduct Coil 600 Perimeter Drain (formerly known as Hydroduct PD Drainage Composite) is a dual profile drainage composite engineered to replace traditional perforated pipe and aggregate perimeter drain tile systems. It consists of a combination low and high profile drainage core, a high performance geotextile and a high strength backing film. The product is used in place of traditional perimeter aggregate drain tile systems to provide an effective transport system to evacuate water from the drainage composite system and surrounding soil. Applied at the base of foundation walls, retaining walls, bridge abutments, tunnels, around earth sheltered structures and under slabs.
Data Sheet Specifications

Bituthene® Protection Board Adhesive
A fast-drying, solvent-based rubber cement used to adhere lightweight polystyrene protection board to vertical areas waterproofed with Bituthene waterproofing membranes.
Data Sheet

Bitustik® Tape
A specially formulated, two-sided highly aggressive adhesive tape recommended for adhering Hydroduct drainage composites, expanded polystyrene protection board or insulation, or extruded polystyrene protection board or insulation to Bituthene® membranes. May also be used for additional protection when forming end laps with Preprufe membranes.
Data Sheet

Hydroduct® HZ-2 Drainage Composite
obsoleted - See Hydroduct® 660

Hydroduct® LPC Drainage Composite
no longer available

Hydroduct® 2 Drainage Composite
obsoleted - See Hydroduct® 220

Hydroduct® HZ
obsoleted - See Hydroduct® 660

Hydroduct® Classic Drainage Composite
obsoleted - See Hydroduct® 200

Hydroduct® HR Drainage Composite
obsoleted - See Hydroduct® 225


Specifications | Contact Us | Links | Product Guide | Project Profiles | FAQs

Grace Constructon Products Home Page | W.R. Grace & Co. Home Page

Copyright ©2000 W.R. Grace & Co. -- Conn.